4mm Policarb®, 2 Walls - Clear + UV

New product

4mm Multiwall Sheet is the perfect solution for fast and easy projects. One side of the Clear Policarb® product is coated with U.V. protection that guarantees resistance to aging due to atmospheric agents and UV rays. 

More details

Your configuration:
Final price
$0.00
creditcards
 
More info

4mm Policarb® is the perfect solution for space/office dividers, windows, porches, gazebos, ceilings. The panel can be used for curves and flat cover, ensure water tight seal event with minimal slope. This panels comes in Clear with 1 side UV protection: their High-resistance pigments are added to the polycarbonate to achieve different light transmission values. 

The sheets are connected to each other by long polycarbonate connecting elements called H Profile Snap:

Polycarbonate
sheets are fastened on both sides to the structure and only the edges on both sides are inserted into the profile that holds the sheets

Sheets must be be fastened to the structure using specific washers with a seal to guarantee a watertight finish and allow the material to expand due to changes in temperature. For proper point fastening sheets should be all fastened to supports at all four corners and at points 6" in from the edges of each purlin support. 

In order to prevent dust and dirt penetrating inside the ribs, the exposed top and bottom ends of a sheet must always be sealed first with the solid aluminum tape on the top and vent tape at the bottom, than with the proper "U" profiles that, for this size, you can buy in polycarbonate.  

*ePlastsUSA gives you advice regard contruction and roofing in particular. Therefore, the full responsibility for the installation of panels, the proper attachment between the panels themselves and between the panels and parts of the structure, as well as the full support of the panels against natural forces and standard building loads remains with the roofing and the constructor.

 
Data sheet
Thickness 4mm
Walls 2 Walls - H Structure
Colour Clear + UV
Manufacturer Gallina USA
Light Transmission Clear + UV: 85%
Thermal Insulation Clear + UV: 83%
 
Installation Guidelines

When buying a Polycarbonate profile consider installing it with the recommended accessories:

Also, consider your frame, purlins or rafting.

Raftings

Purlins

Consider the Thermal expansion. When making the whole for the screws, allow enough room for expansion by making a bigger whole of the size of the screw. 

 
Shipping Info

Shipping cost will be calculated on the total length and width of the sheets and items added to cart. Since shipment costs are variable and some times can have an high impact on the total purchase, we want to be sure to provide the lowest shipment costs available on the market. After the order has been placed, our customer support will reach you back in max 48 hours with a personalized shipment quote. All orders will be shipped in 5-7 business days after payment is received.

Sheets over 48x96 require additional packaging and special truck delivery and depending on your facility, you could need a liftgate. Customers need to be prepared to get the crate off the truck on the delivery date. The truck driver only brings the pallet to the end of the truck and it is customer responsibility to offload the materials.  

We don't want you to receive damages products. This is the reason we package the polycarbonate sheets with solid wood crates like following one. 

No products

To be determined Shipping
$0.00 Total

Check out