Accessories

4 Items results

per page
Set Descending Direction
  1. Snap H Profile Clear - 4-8mm

    FROM $1.16 per sq/ft
    Snap H Profile Clear - 4-8mm
    FROM $1.16 per sq/ft

    Ideal for polycarbonate sheets of small thickness. It is used for connecting 2 sheets side by side through a base and cape polycarbonate elements. 

  2. It is specially designed to be screwed to the frame for connecting 2 sheets on the length side. It can be used for polycarbonate sheets and acrylic sheets from 4 to 12mm.

    • Easy assembly and installation •High quality, long lasting, and weather resistant aluminum extrusion
    • Distributes load pressure to prevent stress on sheets
    • Cap is fixed to the base holding sheets firmly in place
    • High quality gaskets prevent the penetration of water, dust, and dirt
    • Seamless finish with concealed screw covers
  3. Solid Aluminum Tape

    As low as FROM $11.43 per sq/ft
    Solid Aluminum Tape
    As low as FROM $11.43 per sq/ft

    The solid tape should be applied on the top width edge of the polycarbonate sheets to prevent water, dust and dirt to get inside the ribs. Different sizes available for panels from 4 to 45mm.

  4. Vented Aluminum Tape

    As low as FROM $30.93 per sq/ft
    Vented Aluminum Tape
    As low as FROM $30.93 per sq/ft

    The solid Vented tape should be applied on the bottom width edge of the polycarbonate sheets to allow condensation drainage and prevent dust and dirt to get inside the ribs. Different sizes available for panels from 4 to 45mm.

4 Items results

per page
Set Descending Direction