Due to the current situation and our measures to protect our employees, orders are taking longer than usual with extended leading time up to 15 business days. We hope for your understanding in these challenging times and will do our best to ship your order as soon as possible – stay healthy!

Accessories

Showing 19-29 of 29 results

per page
Set Ascending Direction
  1. The R profile is specifically designed for sealing polycarbonate sheet edge on corners. It can be applied even after the solid/vented aluminum tape, it can easily allow you to make corners with 2 polycarbonate sheets. It also cover hollow sheets edge to prevent dust, water and bug get access to the hollow space by providing a neat finish.

    It can be easily cut.

  2. The R profile is specifically designed for sealing polycarbonate sheet edge on corners. It can be applied even after the solid/vented aluminum tape, it can easily allow you to make corners with 2 polycarbonate sheets. It also cover hollow sheets edge to prevent dust, water and bug get access to the hollow space by providing a neat finish.

    It can be easily cut.

  3. Neoprene Washers

    As low as FROM $10.20 per box
    Neoprene Washers
    As low as FROM $10.20 per box

    The Neoprene Washer must be applied between the screw and the polycarbonate panel. It's made by galvanized steel with a layer of neoprene. The steel top of the gasket allow the pressure to spread around the washer, the neoprene, at the bottom, ensure sealing from water.

    The gasket is 1" wide. Remember to not fasten the polycarbonate panels with the screws within 1/2" of the edge and to drill the polycarbonate with a diameter of 5/64" larger than the screw size. This will allow the a proper expansion of the panel.

  4. Bubble Washers

    As low as FROM $19.50 per box
    Bubble Washers
    As low as FROM $19.50 per box

    The Bubble Washer must be applied between the screw and the polycarbonate panel. It's made by galvanized steel with a layer of soft plastic. The steel top of the gasket allow the pressure to spread around the washer, the bubble, at the bottom, ensure sealing from water.

    The gasket is 1" wide. Remember to not fasten the polycarbonate panels with the screws within 1/2" of the edge and to drill the polycarbonate with a diameter of 5/64" larger than the screw size. This will allow the a proper expansion of the panel.

  5. Aluminum Side Profile for the ArcoPlus 547

  6. Glazing Rubber for the ArcoPlus 324 and 547.

  7. Link Platters to be installed on longitudinal support to secure the panels. 

  8. Ideal for polycarbonate sheets of small thickness. It is used for connecting 2 sheets side by side through a base and cape polycarbonate elements. 

Showing 19-29 of 29 results

per page
Set Ascending Direction